Embertec Emberplug EPUSAV-ET-01 Guide d'installation télécharger pdf (Page 3)

Setting Up the Embertec Emberplug™ AV

1. Unplug your existing powerstrip and then plug it into the ‘Power

Saver' socket.

2. Plug AV equipment that can automatically be switched o into

the powerstrip.

3. Identify equipment that requires constant power for cool down

period, timers, program guides and recording features, and plug

into the socket marked ‘Always On’, or into another wall socket. A

powerstrip may also be plugged into the 'Always On' socket.

4. Connect the supplied SmartSensor cable to the side of the Embertec

Emberplug™ AV. Ensure this is plugged in rmly.

5. Place the SmartSensor in a convenient location that is in line of

sight. Close to your television is the best position, and within normal

operation of your existing remote control(s).

6. Plug the Embertec Emberplug™ AV into a 110V or 120V power point.

7. Power is now applied to the 'Power Saver' socket. The LED monitoring

light on the Embertec Emberplug™ AV

will light up for 3 seconds. This

also indicates that the Embertec Emberplug™ AV

has performed a

load check.

Important

Please retain your instruction book for future use.

In the event that you need assistance with your Embertec Emberplug™, please

Alternatively, visit us on our website at www.embertec.us

Quick Connection Guide

1 2 3 4 5 6 7 8 ... 19 20

Pas de commentaire

Embertec Emberplug EPUSAV-ET-01 Guide d'installation Page 3